The Ekinex® EK-FF1-TP binary output / blind actuator allows to command 16 groups of loads or control 8 drives for motorised blinds independently. The device is fitted with membrane pushbuttons for manual command (even in the absence of bus power) and LED’s for status indication; a pushbutton allows to switch between automatic and manual operation modes. The device integrates a KNX bus communication module and is realized for mounting on a standard 35 mm DIN-rail. The device is supplied by the KNX bus and requires an additional 230 Vac power supply to operate.
Technical data
Power supply
- Voltage auxiliary 100-230 Vac 50/60 Hz
- Voltage control section 30 Vdc by KNX bus
- Current consumption from bus < 10 mA
- Power on bus < 240 mW
Outputs
- Number: 16 or 8 independent channels (depending on device use)
- Nominal voltage (Un): 100-230 Vac 50/60Hz
- Nominal current (In): max 16 (10) A (both @100Vac and @230Vac)
- Max. switched power: max 4000 VA @250Vac
