Installation in a conventional flush-mounted device box.
Fits in the cover frames of the Gira TX_44 design line.
Modular design, allowing easy installation and expandability.
Signal transmission and supply of the audio and video components via reverse-polarity-protected and short-circuit-proof 2-wire bus.
Extension of door stations by a colour camera with automatic day or night switching.
LEDs ensure steady illumination of the field of view at close proximity in night mode.
Camera can be manually swivelled 20° horizontally and vertically. In combination with the wide-angle lens, a very wide field of view of the door entry area results.
Automatic background lighting compensation.
Automatic white balance.
Automatic gain control (AGC).
Integrated temperature-dependent camera heating.
Sprayed-water proof cover plate.
Camera cover plate made of shock-resistant plastic. Easy to replace if damaged, e.g. due to vandalism.
Technical data
Power supply: via connection cable
Connecting the connection cable: 2 x connector strip
Protection type: IP44
Power supply
up to 2 cameras: via connection cable
from the 3rd camera: via power supply for door communication
Connections
Connection cable: 2 x connector strip
Video: 1 x connector strip
Image recording element: CCD sensor 0.85 cm (1/3″)
Aperture of the wide-angle lens: 150°
Visible detection range of the camera: 100°
Area of detection (for 20° swivelling): 140°
Colour system: PAL
Pixels: 500 (H) x 582 (V)
Horizontal resolution: 380 TV lines
Switchover threshold for colour to B/W operation: 1 lux
Light sensitivity in B/W operation: 0.1 lux
Electronic shutter speed:: up to 1/100000 s
IR filter: integrated
Recommended mounting height for camera: 1.50 m
Installation depth: 39 mm
Ambient temperature: -20 °C to +50 °C
Notes
The colour camera may not be positioned directly beneath a light.
Suitable for use in a Gira energy profile.
Not suitable for use in a Gira energy profile with light.
