KNX blind actuator, 4-gang AC 230 V / DC 12 - 48 V with manual actuation

Features

• Curtain position can be directly controlled.
• Slat position can be directly controlled.
• Behaviour after bus voltage failure and recovery can be set.
• Separately parameterisable movement times with movement time extension for moving into the upper end position.
• Central control of all blind outputs possible.
• Feedback of the curtain position or slat position.
• Feedback can be delayed until after the recovery of bus voltage.
• Assignments of up to five different safety functions (three wind alarms, one rain alarm, one frost alarm) or optionally with cyclical monitoring.
• Forced setting function can be realised for each blind output.
• Integration in scenes is possible, 8 internal scenes at the most can be parameterised per channel.
• Memory function for light scenes.
• Sun protection function with fixed and variable curtain or slat positions can be activated.
• Extended sun protection with extensive control functions.
• Integration in temperature management of building possible.
• Blocking of individual outputs manually or with bus.
• Active or passive (object can be read out) cyclical feedback functions.
• Building site operation: Outputs can be operated manually without bus voltage with operating voltage only.
• For mains voltage AC 230 V (4 channel) or low voltage DC 12 to 48 V (2 channel).
• Connection of various external conductors.
• Independent control of the four blind outputs.
• Automatic curtain moving time detection for AC 230 V drives with mechanical stop position switches.

Technical data

Notes

• Installation on DIN top-hat rail.
• VDE approval in accordance with EN 60669-1, EN 60669-2-1.

Scope of supply

• KNX connection and junction terminal included in the scope of supply.

Dimensions