Switching actuator, 4-gang 10 A for KNX

• Xpress configuration for simplified ETS project planning based on predefined standard use cases.
• Individual configuration with full range of functions available for selection.
• Simplified configuration profiles for clear application scenarios.
• Diagnostic function for ETS application and firmware compatibility.
• Up to 8 internal logic functions for simple and complex links.
• Electronic manual operation for each channel with LED display.
• Smart linking enabled.

Switch outputs

• Independent switching of all outputs.
• Each output can be operated as an NO contact or an NC contact.
• Central switching functions via up to 6 objects (On/Off/Permanently On/Permanently Off) and group feedback.
• Status message can be transmitted on change or cyclically.
• Response in the event of bus voltage failure/restoration can be configured for each output.
• Each output has an individual logical link.
• Blocking or forced setting function for each output.
• Comprehensive timer functions such as switch-on and switch-off delay, staircase light (with pre-warning).
• Can be integrated into up to 64 scenes per output.
• Elapsed operating time meter can be activated for each output.
• Input monitoring for cyclic updating of the switching object with safety position.

Logic functions

• 8 internal logic functions for processing and linking KNX telegrams.
• Supports logic gates such as AND, OR and XOR with up to four inputs.
• Includes converters, blocking elements and timer functions for flexible signal processing.
• Comparators and limit switches for various data formats, including hysteresis.
• All logic functions have their own KNX communication objects and can evaluate signals from the actuator and other bus devices.

Notes