KNX RF push-button - LS Range

Intended use

Operation of loads, e.g. light on/off, dimming of brightness and colour temperature, Venetian blinds up/down, value transmitter 1 byte, 2 bytes, 3 bytes and 6 bytes, brightness values, temperatures, calling up and saving of light scenes
Room temperature control
Operation in cabled KNX systems via radio converter (ref.-no.: MK 100 RF)
Operation with switch, dimmer, DALI, blinds or room thermostat insert or satellite insert 3-wire

for inserts "blinds" ref.-no.: 1730JE and 1731JE
for room thermostat insert ref.-no.: 1790RTR
for inserts "light" ref.-no.: 1701SE, 1704ESE, 1702SE, 1710DE, 1711DE, 1713DSTE, 1720NE, 1723NE
 

Product characteristics

• Activation of blinds/shutters, with blinds insert
• Switching and dimming of lighting, with switch or dimmer insert
• Colour temperature control of lighting, with DALI push-button controller TW
• Room temperature control, with room thermostat insert
• Operation with 2-wire or 3-wire satellite insert, rotary satellite insert or push-button
• Push-button functions adjustable: switching, dimming, blinds, value transmitter, scene extension, 2-channel operation and controller extension
• Operating concept (rocker or button) adjustable for each operating area
• Button evaluation (single-area operation or dual-area operation) adjustable
• One or two functions per operating area
• Controller extension with adjustable operating mode selection, forced operating mode switch over, presence function and setpoint adjustment
• Status LED – red, green or blue – adjustable per rocker
• LED functions orientation lighting and night reduction can be set separately
• Brightness of LED adjustable and switchable while in operation
• Disabling function: Disabling or change function mode of single or all button functions
• Internal sensor for temperature measurement, can only be used with the following inserts: ref.-no. 1701 SE, 1704 ESE, 1713 DSTE, 1731 JE, 1730 JE, 1790 RTR, 1723 NE
• Improved temperature measurement by including external temperature values via communication object
• Commissioning with ETS version 5.7.5 or higher

Technical Data