KNX DALI gateway Plus

GiraSKU: GIR218000

Price:
Sale price£450.00

VAT calculated at checkout

Stock:
Only 2 units left
 More payment options

Description

Control of lights and other applications with DALI operating units in KNX installations up to a maximum of 64 DALI devices or group control up to 32 groups. 

Features

  • Compatible with DALI and DALI 2 standard.
  • The DALI gateway Plus forms the interface between a KNX installation and a digital DALI lighting system.
  • Control of max. 64 DALI operating devices as individual control, group control in max. 32 groups, or central control via a broadcast telegram (group 17 - 32 each with max. 2 operating devices).
  • Manual actuation of the devices also independent of the bus (also building site operation with broadcast control).
  • Energy-saving function: Switch-off of the power supply of the DALI operating devices possible in a switched-off state (via additional KNX switching actuator).
  • 16 light scenes.
  • The groups can be integrated in the light scenes.
  • Effect control can be configured for max. 16 sequences in 1 to 500 run-throughs (or infinite).
  • Feedback of DALI error status or short circuit and signalling of power supply failure.
  • Active or passive (object can be read out) cyclical feedback function.
  • Group feedback of all switching conditions possible.
  • Feedback can be delayed until after the recovery of bus voltage.

Group and device functions

  • Switching and brightness value: Active (send to the bus in case of change or cyclically) or passive (object can be read out) feedback functions.
  • Brightness range can be set.
  • Bulb-saving switch-on and switch-off
  • Dimming behaviour can be parameterised.
  • Time functions (switch-on/off delay, expanded staircase function – advance warning function in accordance with DIN 18015-2 or reduced continuous lighting).
  • Block function or alternatively forced setting function can be parameterised for each group. With block function, the flashing of light groups is possible.
  • Reading the DALI device state out via KNX.
  • Elapsed operating time meter as forward and backward counter with limit value evaluation.
  • Online or offline configuration of the DALI devices using ETS plug-in.
  • Replacement of an individual defective DALI device is possible during operation without ETS.

Operation of emergency lighting

  • Suitable for operation in emergency lighting systems.
  • Control and monitoring of individual-battery and centrally-supplied DALI emergency lighting systems.
  • Support of DALI emergency light converters in accordance with EN 62386-202 (individual battery-operated emergency lights with DALI interface): Function test, continuous operation test, limited continuous operation test, query of the battery charge.

Technical data

  • KNX medium: TP256
  • Rated voltage
    • AC: 110 to 240 V AC, 50/60 Hz
    • DC: DC 110 to 240 V
  • Power loss: max. 3 W
  • Connections
    • KNX: Connection and junction terminal
    • DALI: Screw terminals
  • Cable lengths between gateway and operating device
    • Ø 1.5 mm²: max. 300 m
    • Ø 1.0 mm²: max. 238 m
    • Ø 0.75 mm²: max. 174 m
    • Ø 0.5 mm²: max. 116 m
  • Connections: max. 4 mm²
  • Ambient temperature: -5 °C to +45 °C

Notes

  • DALI2 support from index status I06 and higher.
  • Operation of emergency lighting systems:
    Statutory and normative specifications vary by country. In any case, the user / professional planner should ensure that the specific guidelines are observed.
  • VDE approval in accordance with EN 60669-1, EN 60669-2-1.
  • Configuration and start-up of the device from ETS 4.1 (recommendation) or with ETS 3 from version "d".

Scope of supply

  • KNX connection and junction terminal included in the scope of supply.

Dimensions

Modular widths (MW): 4

Output Channels: 1

Medium: KNX TP

DALI Standard: DALI-2

Installation: Din Mounted

Module Size: 4 Module

Recently viewed