KNX switching actuator 1-gang 16 A with binary input, 3-gang

GiraSKU: GIR506100

Price:
Sale price£100.78

VAT calculated at checkout

Stock:
Only 2 units left
 More payment options

Description

Features

    Inputs

    • Depending on the ETS parameterisation in the application for switches, buttons or contacts, inputs 1 and 2 either act internally on the relay output or separately on the KNX. Input 3 always acts on the KNX.
    • Functions for the inputs when acting on the KNX (switching, dimming, blind, value transmitter, scene auxiliary unit, 2-channel operation, controller auxiliary unit, no function).
    • Switching: Command for closing and opening of the contact adjustable (no reaction, ON, OFF, TOGGLE).
    • Dimming: Dimming of brightness and/or colour temperature. Command for closing the contact, time between switching and dimming, dimming in different steps, telegram repetition in case of long signal at the input, and sending of a stop telegram at the end of the dimming process all configurable.
    • Blinds: Command for closing the contact and the operating concept can be parameterised. Times for short and long signal at input and slat adjustment are adjustable.
    • Value transmitter: Functionality as 1-byte, 2-byte, 3-byte or 6-byte value transmitter including colour temperature and colour value transmitter possible. Individually configurable values. Value adjustment is optionally possible with a long signal at the input (not with the 6-byte value transmitter).
    • Scene auxiliary unit: Mode of operation (with or without memory function) and the scene number are adjustable.
    • 2-channel operation: When the contact at the input closes, up to two telegrams can be sent out on the KNX. Operating concept adjustable (only channel 1 or channel 2/both channels). The mode of operation of the channels (1-bit, 1-byte, 2-byte, 3-byte, 6-byte) can be configured separately.
    • Controller auxiliary unit: Mode of operation (operating mode switching, forced operating mode switching, presence function and target value adjustment) configurable.
    • Disabling of all or individual inputs via a 1-bit object possible. Polarity of the blocking object, behaviour at the beginning and end of blocking, and behaviour during an active blocking can be adjusted.

    Logic functions

    • The device has 8 internal logic functions.
    • Logic gate (AND, OR, exclusive AND, exclusive OR, each with up to 4 inputs).
    • 1-bit to 1-byte converter with input filter, blocking object and specification of output values.
    • Blocking element with filter and time functions and blocking object.
    • Comparator for values with 9 different input data formats and many comparison operations.
    • Limit value switch with hysteresis with upper and lower threshold values for 9 different input data formats. Including specification of the 1-bit output values.
    • The logic functions have their own KNX communication objects and can process telegrams from the actuator or other bus devices.
    • Switching electrical consumers via a relay contact.
    • Device has three inputs with a common reference potential.
    • Reading in switching states of installation switches or push buttons and other zero-voltage contacts at inputs 1 to 3.
    • Signal analysis of dew and leakage sensors (see accessories) at inputs 1 to 3.
    • Recording of temperature values via remote sensors (see accessories) at input 3.
    • Up to 8 independent logic functions for implementing simple or complex logical operations.
    • Actively transmitting feedback or status messages can be delayed after a bus voltage recovery or ETS programming mode.
    • Bistable relay.

    Switching functions

    • NO contact or NC contact operation.
    • Central switching function via up to 6 switch objects (ON, OFF, permanently ON, permanently OFF).
    • Feedback on switching: Active or passive feedback function.
    • Reaction in case of bus voltage failure or bus voltage recovery can be set following an ETS programming process.
    • Logical linking function.
    • Block function or forced setting function can be parameterised.
    • Extended blocking function with acknowledgement option.
    • Time functions (switch-on and switch-off delay, staircase light function – also with advance warning function).
    • Can be integrated in the light scenes: Up to 64 internal scenes can be parameterised.
    • Scene memory function: Additional visual feedback.
    • Extended scene retrieval (toggling of scenes).
    • Elapsed operating time meter can be activated.
    • Input monitoring for cyclic updating of the switching object with safety position.

    Technical data

    • KNX medium: TP256
    • Connections
      • KNX: Connection terminals to control line
      • Inputs: Connection terminals to control line
      • Load: Screw terminals
    • Connections: Max. 4 mm²
    • Inputs
      • Number: 3
    • Input type: Zero-voltage
    • Polling voltage
      • Auxiliary inputs: approx. 5 V
    • Total length
      • Auxiliary input cable: max. 10 m
    • Ambient temperature: -5 °C to +45 °C
    • Rated voltage
      • KNX: DC 21 to 32 V SELV
    • Switching capacity: AC 250 V, 16 AX
    • Maximum switch-on current: 800 A (200 µs), 165 A (20 ms)
    • Connected load
      • Ohmic load: 2500 W
      • Capacitive load: 16 A, max. 140 µF
      • Motors (blind or fan): 1380 W
      • Light bulbs: 2300 W
      • HV halogen lamps: 2300 W
      • HV LED lamps: typically 400 W
      • Wound transformer: 1200 VA
      • Tronic transformer: 1500 W
      • Fluorescent lamps, uncompensated: 1000 VA
      • Fluorescent lamps, duo-circuit: 2300 VA
      • Fluorescent lamps, parallel-compensated: 1160 VA

    Output Channels: 1

    Input Channels: 3

    Medium: KNX TP

    Range: One

    Installation: Flush Mounted

    Recently viewed